Wednesday, November 24, 2010

How do i change the brake pads on my corsa?

i have a Y reg corsa and just wondering how to change the brake pads..................How do i change the brake pads on my corsa?
http://www.allcorsa.co.uk/forums/showthr



this shud help u outHow do i change the brake pads on my corsa?
Unless you are a mechanic, (and I don't think you are if you're asking this question!) I would take it to a garage and get them to do it for you. If you don't know what you are doing it could be dangerous.How do i change the brake pads on my corsa?
try this



go to:



http://www.marshallpl.org



scroll down, on the lower left hand side of the screen you will see a little box that says %26quot;EBSCO HOST%26quot;

click the box

it will bring up a sign in screen.



enter User ID: marshall

password: public



this takes you to a page of useful links. click on the link titled auto repair reference center. choose your vehicle and year.



this will bring up a list of auto manuals for your vehicle.



it also gives several wiring diagrams for most vehicles. most of the wiring diagrams are in PDF form and you can either download them for use at your convenience or you can print them. you can also print almost every single page on their site.How do i change the brake pads on my corsa?
remove the wheel undo the bolts holding caliper on. push piston back replace pads and put calipers back on

Mintex part number for pads MDB2073

discs if solid MDC1453

discs if vented MDC1454

you also get it in a disc and pad kit which is MDK0149How do i change the brake pads on my corsa?
Brakes are really important, my advice would be. If you have any concern about doing the work yourself don't take a change, take the car down to your local garage.

If you do it yourself, its really straight forward to go. Just take your time and make sure you re-fit all the parts that came off.

If the pads are badly worn, when you push the pistons back into the callipers. Make sure that the brake fluid in the reservoir does not over flow into the engine bay.

Ja.How do i change the brake pads on my corsa?
its fairly simple get either a 12 or 13%26quot; spanner undo the bottom bolt of the caliper. you can push the piston back with a screwdriver. lift the caliper up and the pads should just slide out, if they dont just pry them out with the screwdriver clean with wire brush and then simply replace pads (make sure the pads go on same side they come out cause they are different). After, just tighten the bottom bolt you took out.Just check the top one just in case to make sure better safe than sorry.How do i change the brake pads on my corsa?
Invest in a Haynes manual. Use Ferodo pads, they are better than the originals.How do i change the brake pads on my corsa?
keep the brake pads and get rid of the corsa

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.